{"product_id":"audi-c7-s6-c7-s7-d4-s8-performance-2-piece-rotors-rear-356mm-x-22mm-14-02-x-0-87","title":"Audi C7 S6 \/ C7 S7 \/ D4 S8 Performance 2 Piece Rotors - (Rear) 356mm x 22mm (14.02\" x 0.87\")","description":"\u003cp\u003eDescription Paragon 2-piece Rotors (Rear Pair) for Audi C7 S6 \/ C7 S7 \/ D4 S8 Enhance your Audi’s performance with these rear rotors, measuring 356mm x 22mm. Upgrade to OE replacement for a powerful ride. Dominate the road with bold action and motion. Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/p\u003e\u003cp\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/p\u003e\u003cp\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. *Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/p\u003e\u003cp\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D) Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30% Floating 2-piece design Minimizing brake fade \u0026amp; judder during extended sessions Rotor to hat mounting system: D-Bobbin (Short) – 10-bolt Each rotor assembly weighs 13.3 lbs (6.03 kg) – save 6 lbs of unsprung weight per rotor vs. stock units.\u003c\/p\u003e\u003cp\u003eDirect replacement of: OEM Audi part # 4H0615601F \/ 4H0615601L \/ 4H0615601P *For models with OEM 356mm iron brakes Includes One pair of Paragon Performance 356mm x 22mm (14.02” x 0.87”) 2-piece rotor assemblies with black hard coat\/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install) Detailed installation manual Part # (w\/ black hard anodized hat): P2R.109.356.220.22200.08.01.01.R Part # (w\/ hard anodized hat): P2R.109.356.220.22200.08.01.02.R.\u003c\/p\u003e\u003cp\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions. Specifications Diameter: 356mm (14.02″) Thickness (new): 22mm (0.87″) Thickness (min.): 20mm (0.79″) Type: 2-piece floating Face Pattern: Slotted Vented \/ Solid: Directional ventilated Number of Vanes: 36 Hat Material: 6061-T6 aluminum Friction Ring Material: CM-250 high carbon alloy cast iron Rotor Finish: CBN turned Weight (per rotor): 13.3 lbs (6.03 kg) Cross Reference.\u003c\/p\u003e\u003cp\u003eOEM Audi 4H0615601F \/ 4H0615601L \/ 4H0615601P Brembo 09.C170.11 Girodisc A1-187.\u003c\/p\u003e","brand":"kavqeno","offers":[{"title":"Black Anodized","offer_id":48105589637251,"sku":"YFLAR250906-Black-Anodized","price":140.7,"currency_code":"USD","in_stock":true},{"title":"Clear Hard Anodized","offer_id":48105589670019,"sku":"YFLAR250906-Clear-Hard-Anodized","price":128.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0753\/0974\/4259\/files\/C7-S6-C7-S7-D4-S8-356x22mm-2-pc-rear-brake-rotor-disc-paragon-performance-1__16292_cf07ec62-168d-419f-a372-5db1afcfe7a8.webp?v=1788627430","url":"https:\/\/kavqeno.shop\/products\/audi-c7-s6-c7-s7-d4-s8-performance-2-piece-rotors-rear-356mm-x-22mm-14-02-x-0-87","provider":"kavqeno","version":"1.0","type":"link"}